z150 Series for Timing and Navigation Applications
 |  |
z150 Series (Front Panel) | z150 Series (Rear Panel) |
| Model | Receiver | Type of Application | Output |
|---|---|---|---|
| P200 | GPS | Position, Velocity, Time / Static & Mobile | 1 Port RS232 1 PPS-out |
| P300 | GPS | Position, Velocity, Time / Static & Mobile | 1 Port RS232 + 1 Port USB 1 PPS-out |
| P400 | GPS GLONASS GALILEO COMPASS | Position, Velocity, Time / Static & Mobile | 1 Port RS232 + 1 Port USB 1 PPS-out |
| T500 | GPS GLONASS GALILEO BEIDOU QZSS | Time / Stationary | 1 Port RS232 + 1 Port USB 1 PPS-out |
Based on latest GNSS receivers generation (sensitivity @ -160dBm), the z150 Series fulfills many customer’s applications, thanks to its robust power supply (9-70Volts AEC-Q100 Automotive grade 1 qualified, powering is also possible directly through DB9 connectors).
GPS RF signal through a FAKRA Blue connector, Industrial extended temperature qualified (-30°C to +85°C) the z150 Series is ideally suited for Embedded/Navigation and timing applications.
z150 Series can be declined also in TIMING versions with dedicated features such as TRAIM and Self-Survey, 1PPS (15ns accuracy) through rears SMA connectors.
If you are looking for a very accurate 1PPS to synchronize your systems, z150 Series corresponds to your needs, mechanically ready to use in an anodized enclosure, flanges for a robust fixing are supplied on request.
z150 Series is simply the best choice for your commercial or industrial application.
Ordering Information for z150 Series
| Part Number | Receiver | GNSS | Port A | Port B | 1PPS RS232 | 1PPS USB | Freq-out SMA | 1PPS-OUT SMA | TRAIM Self-Survey |
|---|---|---|---|---|---|---|---|---|---|
| P200 | Trimble C1919C | GPS | RS232 | Yes | Yes (TTL) | Yes (3) | |||
| P300 | Trimble Copernicus II | GPS | RS232 (1) | USB | Yes | Yes | Yes (TTL) | Yes | |
| P400 | NV08C-CSM | GPS, Glonass Galileo, Compass | RS232 | USB | Yes | Yes | 10Mhz (2) | Yes (TTL) | Yes (4) |
| T500 (5) | Trimble RES SMT 360 | GPS, Glonass, Galileo, Beidou, QZSS | RS232 | USB | Yes | Yes | Yes (TTL) | Yes (4) |
(1) RS422 on request (2) 40Mhz on request (3) Not configurable (4) Only usable in static mode for timing applications
(5) Well-suited for timing applications in stationary mode
| 1PPS | One Pulse Per Second |
| TRAIM | Time-Receiver Autonomous Integrity Monitoring algorithm (on clock and frequency) which automatically detects and rejects faulty satellites from the solution. TRAIM assures high PPS integrity. |
| Self-Survey | The receiver enters automatic Self-Survey mode on power-up during a period of time (10 or 20 minutes depending on the receiver) to ensure accurate reference position for improved timing accuracy. When the self-survey is complete, the receiver outputs PPS with only one satellite being tracked. |
 | Optional: TSS-P software for Windows platforms. TSS (Time Service Software) updates PC clock with a guaranteed accuracy of 1(one) millisecond by using a GNSS receiver on a com port providing 1PPS and NMEA messages. The software includes specialized algorithms to guaranty the accuracy. |
z150 Series Comparison Table (Part #1)
z150 Series Comparison Table (Part #2)
Connector Pinout
| Pin DB9 | RS-232 | RS-422 |
|---|---|---|
| 1 | Ground | TX+ |
| 2 | Tx | TX- |
| 3 | Rx | RX- |
| 4 | NC | RX+ |
| 5 | Ground | Ground |
| 6 | Optional External Power | Optional External Power |
| 7 | PPS (RS-232 Level) | NC |
| 8 | NC | PPS+ |
| 9 | Ground | PPS- |
Specifications are subject to change without notice.